XTP Sensor

The XTP monitors the draft pressure at the appliance outlet while the control box receives a signal from the XTP, which is used to increase or decrease the fan speed.

The control box and the XTP-Sensor are both installed inside the mechanical room, where the XTP-Sensor provides a pressure differential signal to the control box. The required room pressure can be set at the control box. The outdoor pressure probe is installed on a roof or outside wall.

The XTP is a control used in the CASV Chimney Automation System ^TM, CASI Chimney Automation System^TM, MDVS Mechanical Dryer Venting System^TM,MODS Modulating Over-Draft Damper System^TM, and MCAS, Modulating Combustion Air Systems^TM.